Cleaning How to

How to Clean your Drum Sets

Know-How To Clean a Drum Set With These Easy Steps

As Musicians, we all love to see our instruments shining and glowing. We want to maintain our instruments the best that we can. That is the case with drummers too. Cleaning up drum sets after performing gigs is a routine that every drummer follows. Although many a time, you may not know how to clean a drum set so that they get maintained with a high standard of hygiene. 

You not only have to save your drums from dust and dirt but you also have to keep a firm eye to ensure every bit of sweat and other particles are completely gone after a cleanup. Nobody wants to see rust on their drum sets and neither do you. So let’s see these steps on how to clean a drum set. 

1. Disassemble the Drum Set and do the cleanup at every corner

The first and foremost thing, to begin with, is to disassemble the drum set and look for the dirt built up at every corner of the set. This will allow you to do a detailed inspection of your drums and enable you to clean is thorough. To start with this step you can remove the head of your drums and keep all the hardware in a safe place.

You definitely need to know how to clean drum heads. You can then easily clean all the junk that has been built up in between the heads and the rims and also look for any missing or loose hardware. You must also check any damage to the tension lugs or the wires and repair if you find any. 

2. Cleaning the entire drum set

There are a lot of products available in the market to clean the drums. Although you may buy some of them to clean your drum set but do not commit the mistake of using ammonia or any harsh material to clean up the drums.

Drums are just like your furniture at the home and when you do not use ammonia on your furniture then why would you want to use that on your drums? It’s a mistake that many people make only to lose the life of their drum sets. You can simply clean your drum set with water, a clean rag or a window cleaner and that is the best way to go about how to clean drums.

3. Post clean up polishing

After you have cleaned your drums thoroughly it is time to polish them to give them the brand new look that they deserve. You can use non-abrasive chrome to polish all the hardware. You only have to apply a very small amount of chrome polish on the rag and then you can apply that to every crevice.

After you are done applying it, you must wipe a clean rag on it so as to make it shine. Furniture polish can be sprayed afterward to prevent the dust from settling and you will see your drum sets being transformed into a brand new drum set

4. Cleaning up the cymbals 

Cleaning up of the cymbals is a very important step that many people take for granted. The cymbals of your drum set should be cleaned properly in order to keep them rust-free and shining.

Cymbals are made up of bronze most of the time and need soft cleaner instead of a harsh one. Cleaners such as dish soap work the best to remove all the fingerprints on Cymbals and polishing them make a lot more difference. After you are done cleaning up the cymbals, you will be happy to see them shining like they are new!

5. Cleaning up the hardware

Drum Hardware is the final part of cleaning up the drums. It is empirical to clean up the drum’s hardware with the utmost care. Hi-hat stands and bass pedals are more than important to get cleaner carefully as these hold up a lot of dirt. Polishing them with chrome is even better after cleaning up in order to maintain the hardware.

It is also very important to disassemble the stands and clean away all the dirt that has gathered at the point where tubes fit together.

A little bit of lubricant is also important like a silicone-based lubricant as it avoids damages to the finishes of the drums. It also helps when your drums have had rust and corrosion on them. In the end cleaning up the hardware is an important step to maintain your drum set. 

6. Reassembly and Tuning of the Drums

After the clean up of your drums is over, the reassembly takes place and then the tuning up of drums also becomes important. You can search online about tuning up the drums and do so perfectly. 

Maintaining your drums after gigs

However, most of the people carry out the cleaning of their drums annually, but you can also do some exercises to maintain your drums cleanliness and hygiene after your gigs.

First and foremost thing to do after a gig is to clean the whole drum set with a damp cloth. After that, you need to put the drums in cases. Soft cases are the best cases to keep your drums in and maintain them. 

Products to use for the clean up of drums

How to Clean your Drum Sets

Brasso: Brasso is an all-purpose metal polish and if you use it to polish the hardware and cymbals of your drum set then you will be pleasantly surprised to see the transformation of your drums. Various drummers praise Brasso and it can be ordered from Amazon.

WD40 Silicone: This silicone is an amazing spray that will definitely keep all the hardware to function optimally. It prevents the hardware to catch rust and corrosion. Silicone can be found on Amazon easily.

Shop Towels: If you have not done the cleaning of your drums from a long time then it is of utmost importance that you buy a box of shop towels. Shop towels are much more durable than paper towels.

Every musician on this earth wants to keep their instruments in the best health that they can, but many a times people do not really know about how to clean a drum set easily and what steps to take in the whole process.

This is the reason that we have discussed about how to clean drums and have presented all the steps necessary to take in the process. Just follow these steps every year when you clean your drums you will be surprised to see your drums in healthy and hygienic condition.

Social Bookmarking: Cleaning of drums is an essential part of any drummer’s role and doing it on routine after every gig ensures the longevity of the instrument. However, it is advisable to do a thorough cleaning of drums just once a year. So, how to clean a drum set? It is an important question and let’s answer the question comprehensively with proper steps.

Cleaning How to

Do You Know How To Clean Xbox 360?

Xbox has been in the market since 2001 and it has been winning the hearts of millions, be your child or your boyfriend, someone who is a gamer at heart will cherish the Xbox as it will not only be valuable gaming console but will be useful too as it provides many additional functions too such as one could stream incessantly, one could watch the video on HD too.

Maintaining the Xbox is very easy. If you knew the structure of the Xbox and how to start the process then you will be fine.

The Xbox 360 is unlike the Xbox One. Xbox one is an updated version and has to be dealt with very delicately. Let us start. In this article, we will discuss how to clean Xbox 360, what equipment you need to clean it, and the tips so that you do not make any mistakes while cleaning it.

What Kind Of Stuff You Need To Clean The Xbox 360:

Do You Know How To Clean Xbox 360?

Everything that you need to clean the Xbox 360 will be available to you in your home. Those things are very easy to come by and if not, you can even but the materials.

  • A soft cloth or a microfibre which is known as Xbox 360 cleaners: ( if you do not have the microfibre then you can purchase it online. It costs less.): this cloth will be helpful to puff away the dust.
  • Q-tip: it will be useful to reach the nooks and crannies of the console.
  • Air- compressor
  • Towel

Tips To Remember While Cleaning The Xbox 360:

Do You Know How To Clean Xbox 360?

These tips are very important for you to remember as this will be handy.

  • Make sure the console is unplugged.
  • Do not use a wet cloth.
  • Make sure that no water gets inside the consoling system. As it will nullify your warranty.
  • Use dry towels to clean the footpad.
  • Do not keep junk near the Xbox 360 as it could fall in the vents and further damage the gaming console.

How To Clean Dust Out Of Xbox 360 Without Opening:

It might seem a bit tough but trust me it is easier. Here are a few easy steps to clean your Xbox 360 without opening it.

  • Unplug the console. If the console is plugged then it will heighten the risk of getting shocked.
  • After unplugging the console, clean the top of the console with a soft cloth or microfibre. Try to puff away the dust from the sides too. Do not use a wet cloth as the water can affect your console.

Water is the enemy of any electric equipment. It can mess up the whole system and you cannot even claim it in your warranty. Anything that happens on your end will not be covered by warranty.

  • Use the q-tips to reach the nooks and crannies of the console where the clothes or the microfibre couldn’t reach.
  • If there is dust settled inside the console then you will have to use the air-compression technique to lure out the dust.

 Do not let the dust settle inside your console. It can harm the whole system. Even after compressing the dust your problem occurs then it is time for service.

  • After cleaning the console, clean the top on which the console was placed.

How To Clean The Xbox 360 Fan:

Here are the steps to clean the Xbox 360 fan.

Do You Know How To Clean Xbox 360?
Do You Know How To Clean Xbox 360?

1. First, remove the plug and then safely place the Xbox 360 on the towel horizontally.

2. Squeeze the top left side of the faceplate while hurting the right hand on the USB door which is placed at the right side of the faceplate. Pull up the USB door to get access to the faceplate. Keep it aside.

3. Use the screwdriver to reach the ventilation grill. Press the power button and repeat the same procedure for the left ventilation grill.

4. Now put the Xbox face down and remove all 14 screws and turn it upside.

5. Now dislodge the outer case from the bottom case. Remove the screws from the back case.

6. Blow out the fans and the blades with compressed air. This is how to clean Xbox one vents.

7. Assemble it safely.

How To Clean An Xbox 360 Disc:

Cleaning it is easy.

1. Open the disc.

2. Brush off any dust that there is in a vertical motion.

3. If there is a light scratch or something then you can simply wipe it with lightly damped cloth.

How To Clean An Xbox 360 Disc Reader:

You have two ways to get it cleaned.

1. You can either ship it to the service center to get it cleaned.

2. You can take your disk and fold it in a soft microfibre, place the disc on the disc reader and insert it and remove it. Keep the process going on for at least 4-5 times until you are satisfied.

How To Clean The Xbox 360 Controller:

  • Take a piece of cloth that is soft or take a microfibre.
  • Slightly brush away the dust on it.
  • Keep it away from water.
  • Clean the joystick and the gap between the buttons using a business card by swiping it.
Cleaning How to

Do You Know How To Clean Xbox?

Xbox is the dream of every child as well every man in the household. And why wouldn’t it be? It has everything that a man every dreams of. Xbox has so many facilities and is a game-changer. It is a perfect gift for your man and kid.

But managing your Xbox should be on your priority list. As much as one thinks that managing the Xbox is tough, let me tell you it is not. It is very easy and totally in your grip. You have to know some basics about cleaning the Xbox and voila, you can do it at home. No need to rush it for servicing.

In other words, this article is about a thorough sketch of the Xbox and it will fill you in with ideas that any Xbox lover should know.

How does the Xbox system get dirty?

Is it simple? Not tending to Xbox one can lead to a performance that will not quench your gaming thirst.

When you place your gaming console on top of the shelf and keep it unattended, the dust gets layered and tampers with the performance of the system. If left unattended for a long time, it can affect the internal parts. In that case, your warranty on the product could save a couple of hundred bucks.

What objects do you need to clean your Xbox one:

All the objects that you need to clean your Xbox one are already in your home. A soft microfibre or a soft cloth is enough to keep your console clean.

One should never use a cleaning product to clean the Xbox one as it will nullify your warranty. If the dust is inside the vent then you can air-compress that too. A business card too, you will know why.

Parts that need cleaning: Very simple. The gaming console should be cleaned

  • On the top side, both sides of the console.
  • The vents.
  • Joystick
  • Controller
  • The gap between the top and the bottom of the controller.
  • The stand on which the gaming console is placed.

How to clean the Xbox one:

A product that is so important to you and that is expensive, it must be looked after and taken care of. Cleaning an Xbox one is not that tough as it may seem. Here is a step by step evaluation on how you can clean the Xbox one.

  • The very important thing to keeping your Xbox free of any dust is to keep a piece of dust clothing on top of your console. Keeping your exterior dust-free is the first step to keeping your interior dust free.

If you don’t want to keep the cloth on top of the console then make sure you run the dust-cloth on the exterior at least one to keep it dust-free.

  • When you start cleaning it, make sure that you unplug the consoling system. By unplugging it, there are no chances of you getting shocks. Make sure when you are handling the console, do it with utmost care.
  • It is very easy to have the dust settled in the consoling system if you don’t remove it. It can mess with your system. Another way of cleaning your Xbox is to air compress it.

The dust that is on the great of the console can be gotten out with the help of the air compressor method. This how-to clean the Xbox one vents. Make sure that you use a pin to stop the blades from moving.

Do You Know How To Clean Xbox?
Do You Know How To Clean Xbox?
  • This is a ‘ how to clean dust Xbox one fan’ 101 as it the next tip on cleaning this console is awesome. If you’re trying to clean your console with damp clothes then let me tell you, No.

If anything that is an enemy of the electronic device that is water. Wiping your dust with damp clothes is not a smart idea.

  • Another of the most important step of keeping your console dust-free is to clean your controller perfectly. It is apart of the console so it must be cleaned too.

The dust cloth is here useful too as there could reside many germs and first which needs to be removed from.

  • Cleaning the Xbox one wires are important too. When you decide to clean it all, make sure you clean it all. It is easy to settle dust Xbox one very easily, so it has to be cleaned properly. Run a cloth by the wires.
  • Never ever do anything in the interior structure of the Xbox as it will nullify the warranty that it comes with.

Whatever happens on the inside is totally covered by the warranty but if something happens to the internal parts, let’s say while cleaning the consoling system, the wet cloth somehow gets in contact with the internal parts, it would be detrimental.

If your console gets damaged by your doing then it does not cover the warranty. So make sure that you do not do anything to damage the console

  • When cleaning, make sure that the dust and dirt are removed from the directional pads by the microfibre. The gap between the top and the bottom of the controller should be cleaned with a business card.
  • If you think that the dust has damaged your internal system then seek help from the Microsoft approved support or warranty.
  • When you are done with cleaning your consoling system, clean the stand on which the consoling system was placed. It is important too.

Some tips to remember while you clean:

When you clean, make sure that you remember these tips. They are handy.

  1. When you clean make sure that you unplug the console. You don’t want to be shocked.
  2. Make sure while trying to get the console dust-free, do not use any cleaning product.